Why I'm qualified to write this (and what it cost me)
I've been running laser engraving production for a small shop since 2019. Over that time, I've made three equipment purchasing mistakes that cost roughly $12,400 combined. Two of them involved used machines.
So when people ask me to compare the xTool F1 Ultra against a used CO2 laser engraver, I have a specific kind of expertise: I've been the guy who bought the "great deal" and paid for it later.
Here's the framework I wish someone had handed me in 2021: compare these machines on four dimensions — all-in cost, metal capability, glass and material range, and daily workflow. Not just sticker price. That's the trap.
Dimension 1: The sticker price lies (and I have receipts)
In March 2021, I bought a used 60W CO2 CNC laser for $4,500. The new price for that model was around $7,800. I felt smart. That feeling lasted about six weeks.
The laser tube had degraded more than the seller disclosed. Replacement: $1,200. Then the chiller started throwing errors — $380 for a refurbished unit. Mirror alignment issues cost me two full days of production. By month seven, I'd spent $2,100 on repairs and lost roughly $1,400 in delayed orders.
That $4,500 machine actually cost me about $8,000 in year one. More than new.
My rule now: add 30% to any used laser price for first-year surprises. If the total still beats new, fine. If not, walk away.
The xTool F1 Ultra runs around $4,000–$4,500 new (prices as of January 2025; verify current rates — they move). No chiller. No external exhaust setup for most materials. No tube replacement cycle. The upfront number looks similar to a used CO2, but the year-one total is a different story.
Dimension 2: Metal cutting — where the comparison breaks
Here's what nobody told me before I bought that CO2 machine: CO2 lasers don't cut metal well. Not without high power, assist gas, and a completely different price bracket.
CO2 lasers excel at organics — wood, acrylic, leather, glass, paper. Metal? They can mark some coated metals with expensive spray, but actual cutting? No. If a customer walks in with an aluminum business card order, a standard used CO2 machine can't help you.
The xTool F1 Ultra has a 20W fiber laser built in. Fiber lasers cut and deep-engrave metal — stainless steel, aluminum, brass, and more. That's not a quality difference, it's a capability difference. It's the difference between having a tool and not having it.
This was my biggest mindset shift: I used to think "laser engraver" was one category. It's not. The light source determines what you can even attempt.
Dimension 3: Glass engraving — the surprise
This one flipped my expectations. I assumed the dual-laser machine would dominate everywhere. Not quite.
CO2 lasers are still the traditional gold standard for glass engraving. The 10.6μm wavelength absorbs beautifully into glass, producing that frosted, consistent look with straightforward settings.
The xTool F1 Ultra uses its diode laser for glass. It works — and works well — but it requires more setup: masking with wet paper, adjusting focus, sometimes a coating. The results are solid for most decorative work, but — and I say this as someone who wanted the F1 Ultra to win every category — if you're running high-volume glass production all day, a CO2 machine's native absorption is more forgiving.
Here's the balanced take: if glass is 80% of your business, a CO2 machine still makes sense. If glass is one of five materials you work with, the F1 Ultra's flexibility wins. You trade a little setup convenience for not needing a second machine.
Dimension 4: Daily workflow and footprint
The used CO2 machine took up half my back room. Chiller, exhaust duct, water lines, and a bed that needed constant leveling. Maintenance was a part-time job.
The xTool F1 Ultra sits on a workbench. It's enclosed, has built-in cooling, and the software workflow is closer to "open file, hit start" than "calibrate for 40 minutes."
Look, I'm not saying desktop machines are toys. I'm saying the workflow difference matters when you're a two-person shop. Hours spent calibrating are hours not spent fulfilling orders.
So which one should you buy?
If you have $3,000, you only work with wood, acrylic, and leather, and you're comfortable troubleshooting your own repairs — a used CO2 machine can work. I've seen it work for people with mechanical backgrounds and lots of time.
But if any of these describe you, the F1 Ultra is the better total-value play:
- You get metal orders and currently turn them down
- You work with mixed materials and can't justify two machines
- Your space is limited (no room for a chiller and exhaust run)
- You'd rather spend time producing than maintaining
The cheapest option isn't the one with the lowest sticker. It's the one that costs you least over two years. I learned that the expensive way — $2,100 in repairs and a damaged reputation with two clients who didn't get their orders on time.
Bottom line: compare machines on what they can do and what they'll cost you to keep running. Not what the seller is asking today.
Prices as of January 2025; verify current rates. Material compatibility varies — always test your specific stock before quoting a client.