The Question I Get Asked First
It's usually 11 p.m. and someone is quoting a rush job. The client wants 120 engraved stainless flasks by Friday, or 40 acrylic award plaques for a Thursday banquet. The message lands in my inbox with a deadline attached and one line at the bottom: how much power does the xTool S1 actually draw, and can it cut metal?
I get it. Those two questions decide the purchase. Power draw decides whether the machine lives happily in a spare bedroom or fights with a garage that only has one circuit. Metal cutting decides whether you can take the job at all.
I asked the same two things in 2023, before I bought my first diode machine. Two years of rush orders later, I think they're the wrong questions — or at least, they're the questions that get answered easily while the ones that actually matter stay hidden.
Three Different Numbers Called "Power"
Here's what tripped me up first. When people say "power" on a laser engraver, they mean three unrelated things, and the marketing copy doesn't always make it obvious which one is on the page.
Optical output. That's the 10W, 20W, 40W number in the model name. It's the laser module's output at the workpiece. It's the number everyone compares.
Wall draw. That's what the whole system pulls from your outlet — module, controller, motors, fans, lights. For diode systems in this class it's typically a few hundred watts at peak, not thousands. The optical rating and the outlet draw are related, but they're not the same number, and they don't scale the way people assume.
Cutting capability. Not a number at all. It's a function of material, thickness, wavelength absorption, assist gas, focus, and how many passes you're willing to run.
Why does the distinction matter? Most buyers focus on number one, wire for number two, and then discover number three doesn't behave the way the reviews implied.
Here's the part that actually bit me. The machine was never the problem on a standard 15-amp household circuit. The problem was everything else on the same outlet strip — the air assist compressor, the exhaust fan, a shop vac for the enclosure, and a space heater, because it was February. That combination tripped the breaker twice during a rush job. Not the laser. The heater.
Now the laser and its accessories live on a dedicated circuit. That's it. That's the whole fix, and it cost one electrician visit. But I found out the hard way, at 8:40 p.m., with a client's order half-finished.
"Can It Cut Metal" Is Four Questions Wearing One Coat
Short answer: yes, within limits. The long answer is where people get burned.
Diode lasers in the 20W–40W range can cut thin metal — think sub-millimeter sheet, multiple passes, proper air assist, and realistic expectations about edge quality. They mark and engrave coated metal far more easily than they cut bare metal. If your job is engraving anodized aluminum or marking powder-coated steel, you're in good shape. If your job is slicing clean 3mm stainless, you're looking at the wrong machine, and no wattage number is going to rescue that.
The question I wish people asked instead: what does the metal need to look like when it comes out? Because that determines whether you need a laser, a plasma cutter, or a different process entirely.
Plasma cutters and lasers get compared constantly in search results, and honestly, they barely overlap. A plasma cutter drives a conductive arc through metal. It's fast, it handles thick plate, and it does exactly one thing: metal. It leaves a rough kerf, it can't produce the fine detail a laser can, and it will not touch wood, acrylic, leather, or glass. A laser engraver is the opposite trade — fine detail, thin materials, wide material range, slower and more limited on thick metal.
If someone is searching "plasma cutter" and "laser engraver tool" in the same session, I'd bet they haven't decided what they're actually building yet. That's the real problem. Not the spec sheet.
The Thing Nobody Asks About: Wavelength
This is the one I'd put on a billboard.
Most buyers focus on the wattage number and completely miss the wavelength, which for diode modules in this class sits around 450 nanometers — blue light. That number quietly determines what your machine can and can't do, and it's the reason a lot of people get frustrated the first time they try acrylic.
Here's the counterintuitive bit: clear acrylic and blue diode lasers don't get along. The beam passes through transparent material instead of being absorbed by it. You can work around it — masking the surface, choosing opaque or colored stock, dialing in focus and speed — but if your business is cutting clear acrylic sheet all day, a diode laser is fighting its own physics, and a CO₂ system is simply the tool built for that job. That's not a knock on either technology. It's what the wavelength does.
So how do you cut acrylic sheets on a diode machine? Opaque or colored stock, air assist on, focus dialed in, speed set so you're cutting rather than melting. Get those right and colored acrylic cuts cleanly, with a cleaner glossier edge on some colors. Skip the air assist and you get a frosty, slightly tacky edge that needs cleanup.
Two machines, same nominal settings, visibly different output — and the variable was a hundred-dollar accessory, not twenty extra watts.
What the Wrong Answer Costs
Three failure modes, and I've watched all of them happen to people I know:
You overbuy wattage. Someone purchases the highest-power module available, then runs 90% of their jobs at half power on 3mm plywood and leather. The premium bought capability they use twice a year, while the upgrades that improve every single job — air assist, a rotary for cylindrical work, real ventilation — got skipped.
You underbuy and stall. The opposite. A shop takes a metal job based on a video, then discovers the video was cutting 0.5mm shim stock with a dozen passes. The order ships late. In a rush business, late is worse than expensive.
You buy the wrong category entirely. A plasma cutter shows up for a job that needed fine detail across mixed materials. Or a diode laser shows up for a job that needed to slice thick steel plate. Both machines are good. Neither is universal.
The real cost usually isn't the machine price. It's the rush reorder, the refunded job, and the client who doesn't call back.
The Short Version
If you're evaluating the S1 — or honestly any diode machine in this class — here's what I'd check, in this order:
- Circuit headroom, not just machine draw. Add the laser, the air assist, the exhaust, the shop vac, and anything else on that circuit. Then leave margin. A 15-amp circuit at 120 volts gives you roughly 1,800 watts of ceiling, and continuous loads shouldn't sit near it.
- Match the module to your actual job mix. If 80% of your work is wood, leather, and opaque acrylic, the mid-range module plus good air assist outperforms the top module alone. If you're engraving coated metal weekly, that changes the math.
- Test the material, not the spec sheet. Get a scrap of the exact acrylic or metal you'll run and cut it before you promise a client deadline. Spec sheets describe lab conditions. Your shop has different conditions.
- Know the limits and quote accordingly. The certainty you sell to a client comes from knowing what your machine will and won't do — not from hoping the wattage covers it.
I'm not going to pretend I have this fully figured out. I still don't understand why two identical machines with identical modules produce visibly different cuts on the same sheet of acrylic — my best guess is tube-to-tube variance in focus and diode alignment, but I've never confirmed it.
What I do know: the power number on the box is the easy question. The wavelength, the accessories, and the circuit are the ones that decide whether you make Friday's deadline.